Adhesive Filling Tray - Xerox D95 User Manual

Tip
During larger binding jobs, the trimmer waste tray may require emptying more
frequently.
1. Open the trimmer waste tray.
2. Lift and remove the inside tray/bin.
3. Empty the contents of the tray/bin into a waste container.
4. Visually check to ensure that all scraps are removed from the tray area of the machine.
5. Reinstall the tray/bin into the trimmer waste tray.
6. Gently close the trimmer waste drawer.

Adhesive filling tray

Read the following before performing this procedure:
The adhesive supply may be replenished while the binder is in operation.
Use only the specified adhesive for use in the binder. Any other adhesive may result
in binder malfunction.
Store the adhesive in a cool, well-ventilated area and away from high temperature
and humidity. The adhesive may combust if placed in an area with open flame or
high temperature.
Do not over-fill the adhesive replenishment hopper; otherwise the covers may not
close properly and adhesive pellets may get into other areas of the binder causing
malfunctions.
Do not use adhesive pellets that have fallen on the floor as they may contain dirt
and dust which may cause binder malfunctions.
Do not place anything other than the adhesive pellets into the adhesive replenishment
hopper as this may cause a fire in the binder.
The adhesive pellets are transferred to the binder as the supply in the binder is
consumed. The binder can contain about 0.8 pounds (380 grams) of adhesive.
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Perfect Binder (D110/D125/D136 with integrated controller)
21-21