Xerox D95 User Manual page 376

Standard/Booklet Maker Finisher
Item
Supported Paper Size
Supported Paper Weight
Tray Capacity
Stapling (variable length)
22-48
Top Tray:
Maximum: SRA3, 13 x19 in., 12.6 x19.2 in., 330 x 488 mm (custom
size)
Minimum: 100 x 148 mm (SEF), 4 x 6 in. (SEF), A6 (SEF) postcards
Stacker (middle) Tray:
Maximum: 13 x 19 in. (330 x 488 mm), SRA3
Minimum: B5, Executive (7.25 x 10.5 in.)
Optional C/Z Folder tray: Supports A4 (SEF) and 8.5 x 11 in. (SEF)
Delivery to a supported third-party, DFA device:
Maximum: 13 x 19 in., SRA3
Minimum: B5, Executive (7.25 x 10.5 in.)
Trays:
Top Tray: 55-350 gsm
Stacker (middle) Tray: 55-300 gsm
Optional C/Z Folder tray: 64-90 gsm
Delivery to a supported third-party, DFA device: 55-350 gsm
Top Tray: 500 sheets
Optional C/Z Folder tray: Minimum 30 sheets
*When using A4 LEF, B5 LEF, 8.5 x 11 in. LEF, 8 x 10 in. LEF, 7.5 x 10.5
in. LEF only. When using paper of other sizes, tray capacity is 1,500
sheets and 100 sets.
**Tray may not support some paper types.
Maximum staple sheets: 100 sheets
When using paper of size larger than A4 or 8.5 x 11 in., the
maximum number of sheets that can be stapled is 65.
Staple nails may bend when using certain paper types.
Paper size:
Maximum: A3/11 x 17 in.
Minimum: B5, Executive (7.25 x 10.5 in.)
Staple position:
1 location: (front: angled stapling, center: parallel stapling, back:
parallel stapling*)
2 locations: (parallel stapling)
4 locations: A4 (LEF) and 8.5 x 11 in. (LEF) parallel stapling
*: Angled stapling for A3 and A4
Specification
User Guide