Xerox D95 User Manual page 435

Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs. If paper is torn, check inside the Finishing
Transport and remove it.
1. Open the Finishing Transport front door.
2. Grasp the green handle 1 and gently pull downwards.
3. Remove the jammed paper.
For a paper jam at the exit of the Finisher Module and the entry of the Finishing
Transport, remove it by pulling the paper towards the Finishing Transport.
4. Return the green handle 1 to its original position.
5. Close the Finishing Transport front door.
6. Ensure that the paper jam indication is cleared from the Finishing Transport status
display.
7. Follow the instructions on the UI to restart your print job.
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Standard Finisher Plus
24-31