Selecting Dfa, Third-Party Finishing Device Copy Options - Xerox D95 User Manual

• Original Type
• Lighten/Darken
The features displayed on the main Copy screen vary depending on how the main
Copy screen is configured by the administrator.
6. Enter the quantity.
7. Press Start.
Selecting DFA, third-party finishing device
copy options
If your machine has an optional, third-party, Digital Finishing Architecture (DFA) device
attached, then this profile feature is available.
Prior to physically attaching the DFA device to the machine, device profiles are created.
The profiles represent the characteristics of your finishing device.
Note
Refer to the third-party customer documentation for information on setting the profile
values for the specific DFA device attached to the machine.
A profile for the job can be selected from either the DFE, the Print Driver or the UI Touch
Screen. Up to 12 profiles are available, depending on the DFA device.
Use the following steps to select and print a DFA job from the UI Touch Screen:
1. Place your original documents either in the document feeder or on the document
glass (one original at a time).
2. If necessary, press the Services Home button.
3. Select Copy.
4. Select the Output Format tab.
• Select the DFA Finisher. The DFA Finisher Profile screen displays.
• From the displayed list, select the profile for the job.
If the device is an e-binder, select the binding position.
• Select Save.
• Select the desired Face Up/Down Output option.
5. From the Copy tab, select any other desired features/options.
• Reduce/Enlarge
• Paper Supply
• Copy Output
®
Xerox D95/D110/D125 Copier/Printer
User Guide
Copy
4-3