Xerox D95 User Manual page 191

If image quality is not improved after performing the relevant remedy, contact the
Customer Support Center.
Symptoms Check
The copy is dirty. Is the document glass or
the document cover dirty?
Is the document made of
highly transparent material
like a transparency?
Is the document colored, of
a rough texture or a
blueprint?
Are you making copies of
glossy printing paper?
The copy has Is the scanning glass on the
black lines. feeder dirty?
The copy is too Is the copy density set to
dark. Dark?
The copy is too Is the copy density set to
light. Light?
The copy shifts Is the paper shifting or is
slightly. the leading edge of the
paper not loaded flush with
the tray corners?
Images on the Is the document loaded
copy are skewed. correctly?
Is paper loaded properly in
the tray?
Is the paper guide for paper
Tray 5 (Bypass) set so that
the tray touches the paper?
Are the document guides at
the correct position?
Is the paper tray set
properly?
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Remedy
Clean the document glass or the document
cover.
If the document is highly transparent, marks
on the document cover will be copied. Place a
white sheet of paper on the document and
make a copy.
Either adjust the copy density or image quality
and then retry copying.
Glossy printing paper sticks easily to the
document glass and shadows are sometimes
copied and reproduced as dirt. Place a
transparency or highly transparent film under
the document and retry copying.
Clean the document glass.
Adjust the copy density.
Load the paper so it is flush against the paper
tray corners.
Load the document correctly.
Load paper correctly.
Load paper correctly.
Load the document correctly, and align the
document guides with the edge of the
document.
Firmly push in the tray as far as possible.
Problem solving
15-33