Store To Folder; Selecting An Output Color; Scan Both Sides Of A Document - Xerox D95 User Manual

Simple Scan: This setting is best used for faster processing but may result in
excessively large file sizes. Use this setting to apply the minimal amount of image
processing and compression.

Store to Folder

Use the Store to Folder option to scan documents and save the scanned data in a folder
of the machine.
Note
Folders must be created before using the Store to Folder feature. Refer to the System
Administration Guide for detailed information and instruction on creating folders.

Selecting an Output Color

You can set the output color to scan a document.
1. Select Color Scanning from the current scanning edit window.
2. Select a Color Option.
Auto Detect: The color of the document is determined automatically; the machine
scans in full color when the document is colored; otherwise, scans in monochrome.
Color: Select this option to scan a color document.
Black & White: Scans a document in monochrome two tones. You can select the
document type in Original Type.
Grayscale: Scans a document in grayscale. Adds shades to monochrome, creating
intermediate tones that change gradually. Suited to documents containing
gradations that cannot be reproduced with monochrome (2-color tone).

Scan Both Sides of a Document

You can scan a 1-sided or 2-sided document on one or both sides of paper. By setting
the binding style, both sides are scanned in the same orientation.
1. Select 2 Sided Scanning from the current scanning edit window.
2. Select an option.
1 Sided: Select this option to scan only one side of the document.
2 Sided (Head to Head): Select this option when both sides of the 2-sided
document are in the same orientation.
2 Sided (Head to Toe): Select this option when both sides of the 2-sided document
are in opposite orientations.
More: Displays the 2 Sided Scanning window.
3. If More is selected, the 2 Sided Scanning window opens. Select an option.
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Scan
5-13