Network Tab Printing; Network Printing On Tabs Using The Ps Print Drivers; Network Printing On Tabs Using The Pcl Print Drivers - Xerox D95 User Manual

9. Enter the desired output quantity using the numeric keypad.
10. Select Start to begin copying.

Network tab printing

Network printing on tabs using the PS print drivers

1. Load the tab stock in Tray 3, Tray 4, or Tray 5 (Bypass). Refer to Loading Tab Paper
in Trays in the Paper and Other Media chapter.
2. From your computer, open the document you want to print.
3. Select File > Print.
4. Select the desired printer.
5. Select Properties.
6. Select the Paper/Output tab.
7. Select the appropriate Paper Tray, Paper Size, and Paper Type (Select Tab Stock if
using the Tray 5 manual tray, otherwise select Printer Default Type).
8. Select the Advanced tab and select Advanced Features.
9. Select Shift tab from the Tab Margin Shift feature.
10. Set the desired shift margin.
11. Select OK to save and close the Tab Margin Shift window.
12. Select OK to save and close the Properties window.
13. Select the desired copies/quantity and OK to print the job.
Note
For additional information, review your print driver documentation.

Network printing on tabs using the PCL print drivers

1. Load the tab stock in Tray 3, Tray 4, or Tray 5 (Bypass). Refer to Loading Tab Paper
in Trays in the Paper and Other Media chapter.
2. From your computer, open the document you want to print.
3. Select File > Print.
4. Select the desired printer.
5. Ensure that Auto-Rotate and Center and Choose Paper Source by PDF page size
are unchecked.
Note
These options may not be available with your version of Adobe Acrobat or Adobe
Reader.
6. Select Properties and select the Paper/Output tab.
7. Click the Paper Select button.
8. If Tray 3 or Tray 4 is being used for the tab stock, then select Paper Settings for Auto
Tray and choose Tab Stock for the paper type.
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Computer operations
11-3