Adjusting The Printed Image And Trim; Fault Codes - Xerox D95 User Manual

Perfect Binder (D110/D125/D136 with integrated controller)
If cuttings/trimmings are present, remove them.
4. Close the book stacker tray.
5. Run a test job to ensure that the binder performs correctly.

Adjusting the printed image and trim

If the printed book is not within the desired parameters, you can adjust the settings
from the system UI.

Fault codes

053-100, 053-101, 053-102, 053-103, 053-104, 053-105, 053-106, 053-107, 053-108,
053-109, 053-110, 053-111, 053-112, 053-113, 053-114, 053-115, 053-116, 053-117,
053-118, 053-119, 053-120, 053-121, 053-122, 053-123, 053-124, 053-125, 053-126,
053-127, 053-128, 053-129, 053-130, 053-131, 053-132, 053-133, 053-134, 053-135,
053-136, 053-137, 053-138, 053-139, 053-140, 053-141, 053-142, 053-143, 053-144,
053-145, 053-146, 053-147, 053-148
Cause: Paper jam
Remedy: Remove the jammed paper; follow the instructions displayed on the system
UI to restart your job.
053-210, 053-211, 053-212, 053-213, 053-214, 053-215, 053-216, 053-217, 053-218,
053-219, 053-220, 053-221, 053-222, 053-223, 053-224, 053-225, 053-226, 053-227,
053-228, 053-229, 053-230, 053-231, 053-232, 053-233, 053-234, 053-235, 053-236,
053-237, 053-238, 053-239, 053-240, 053-241, 053-242, 053-243, 053-244, 053-245,
053-246, 053-247, 053-248, 053-249, 053-250, 053-251, 053-252, 053-253, 053-254,
053-255, 053-256, 053-257, 053-258, 053-259, 053-260, 053-261, 053-262, 053-263,
053-264, 053-265, 053-266, 053-267, 053-268, 053-269, 053-270, 053-271, 053-272,
053-273, 053-274, 053-275, 053-276, 053-277, 053-278, 053-279, 053-280, 053-281,
053-282, 053-283, 053-284, 053-285, 053-286, 053-287, 053-288, 053-289, 053-290,
053-291, 053-292, 053-293, 053-294, 053-295, 053-296, 053-297, 053-298, 053-299
Cause: Internal component failure
Remedy: Power off/on the system.If fault continues, contact the Customer Support
Center.
053-301, 053-302, 053-303, 053-304, 053-305
Cause: A cover or door is open
Remedy: Close the opened cover or door; follow the instructions displayed on the
system's UI to restart your job.
053-310, 053-311, 053-312, 053-313, 053-314
Cause: Internal component failure
Remedy: Power off/on the system.If fault continues, contact the Customer Support
Center.
21-28 User Guide