Xerox DocuColor DocuColor 4 Supplementary Manual
Xerox DocuColor DocuColor 4 Supplementary Manual

Xerox DocuColor DocuColor 4 Supplementary Manual

Network-ready color laser copier/printer
Hide thumbs Also See for DocuColor DocuColor 4:

Advertisement

The Xerox DocuColor 4 CP
The Xerox DocuColor 4 CP is a network-ready color laser copier/printer, providing benchmark
image quality. The following information will describe the printing system and specifications for
the print engine as well as the embedded Electronics for Imaging (EFI) controller.
Installation
Physical delivery and setup of the DocuColor 4 CP will be performed by a Xerox authorized
Delivery/Removal carrier. The carrier will install and perform a test of the DocuColor 4 CP. The
carrier will review the "Getting to Know your Product" package with the customer; and provide
software/documentation to the customer. The DocuColor 4 CP was designed for easy
installation, so customers can do it themselves.
The customer is responsible
Installing the DocuColor 4 CP on their network
loading client software (print drivers and utilities)
Customer Training
There is no formal customer training for the DocuColor 4 CP. Copy and print functionality are
intuitive and easy to use.
DocuColor 4 CP. They provide an overview of the product and answer specific customer
questions.

Customer Support

The Xerox Customer Support Centers are available to provide general information, answer
questions and take service calls. You can reach the Customer Support Center at the following
toll-free phone numbers:
To order Customer Replaceable Units, Dry Ink, paper and other thruput materials:

Print Volume Range

The DocuColor 4 was designed to provide benchmark image quality and performance for its
product class. This product is designed for operation in the range of 3,000 to 5,000 prints per
month. We expect 50-75% of this volume to be color prints.
The number of prints between service calls on a digital color printer is highly dependent on
customer expectations of quality and the use of applications and thru-put materials. At an
average usage of 3,000 prints per month, it is expected that service will be required about once
every 20,000 - 25,000 prints.
Terms and product names used in this document may be trademarks or registered
Trademarks of their respective companies and are hereby acknowledged.
Expectation Setting Document for
DocuColor 4 CP
for:
A comprehensive set of documentation is included with the
United States
Canada
United States
Canada
1-800-821-2797
1-800-939-3769
1-800-822-2200
1-800-668-0199
Vers. 2.4 dated: 9/29/99 AML, RD
1
page

Advertisement

Table of Contents
loading

Summary of Contents for Xerox DocuColor DocuColor 4

  • Page 1: Customer Support

    Electronics for Imaging (EFI) controller. Installation Physical delivery and setup of the DocuColor 4 CP will be performed by a Xerox authorized Delivery/Removal carrier. The carrier will install and perform a test of the DocuColor 4 CP. The carrier will review the “Getting to Know your Product”...
  • Page 2: Responsibility Matrix

    Monitor and adjust calibration for color matching of color management systems Download any additional fonts to server Order and replace CRUs Remove and ship failed components to Xerox Provide Helpline Support Provide spared parts Provide Service General Specifications...
  • Page 3: Print Quality

    Duty Cycle Print Quality The Xerox DocuColor 4 CP adds fast, easy-to-use copying to the Xerox DocuColor 4 LP introduced earlier this year. It produces four full color pager or 16 black and white pages per minute. Both products feature the innovative Intermediate Belt Transfer (IBT) technology to yield exceptional image quality at 600 by 600 by 8 dots per inch, enabling rich, vivid color prints for cost-conscious graphic arts and office customers.
  • Page 4: Input Source

    Expectation Setting Document for Speed Print and Copy Speed / System Performance The maximum print speed for the DocuColor 4 CP is up to 4 pages per minute in full color and 16 pages per minute in gray scale/black and white (for both prints and copies). Printing system performance (often called ”click to clunk”...
  • Page 5 The following table lists the supported transparencies, label stock and envelopes for the DocuColor 4. 3R5765 (letter) and 3R93179 (A4) are the transparencies recommended for best print quality. These must be fed out of the multi-sheet inserter (MSI). These Xerox transparencies are specifically designed to provide optimum copy quality, including more vivid colors.
  • Page 6 Expectation Setting Document for Size Media Type Letter Transparency Letter Transparency Letter Transparency Letter Transparency Transparency Transparency Transparency Letter Label Stock Label Stock Commercial-10 Envelope Monarch Envelope DL (110x220) Envelope Letter Cover Stock 11x17 Cover Stock 12x18 Cover Stock Letter Index 11x17 Index...
  • Page 7: Automatic Document Size Sensing

    Expectation Setting Document for Automatic Document Size Sensing The DocuColor 4 CP has the capability to automatically sense document size when a standard size original document is placed on the platen or fed through the ADF. Document size sensing is dependent upon the unit of measurement the machine is configured for (inches/mm) and the voltage configuration of the machine (110V/220V).
  • Page 8: Automatic Document Feeder

    Expectation Setting Document for Accessory 64-MB Memory Upgrade Kit Automatic Document Feeder The maximum document size that can be fed through the optional ADF is 297x431.8 mm (A3, 11x17). The minimum document size that can be fed through the optional ADF is 182x257 mm (B5). The ADF can support document weights from 38-128 (gsm).
  • Page 9 These damages will not be covered under the Xerox Warranty terms. Duplex performance is not expected to match the performance for single sided printing. Paper jam rates will be higher than the rate you will experience for the same thruput material in single sided mode.
  • Page 10: Space Requirements

    Expectation Setting Document for Customer Replaceable Units (CRU cartridges) In addition to consumables, the DocuColor 4 CP is designed with four customer replaceable units (CRUs) which enable reduction in service frequency and higher uptime of the product. These CRUs and consumables are listed in the table below. Item Dry Ink - Black Dry Ink - Cyan...
  • Page 11: Controller Specifications

    PIN Authorization There are two types of PIN authorization that can be enabled on the DocuColor 4 CP scanner: User Authentication: To permit use of the copier Administration Authentication: To permit changes to machine controls and settings The PIN authorization for the printer and scanner are independent.
  • Page 12 Expectation Setting Document for PDF Printing Users can print PDF directly to the DocuColor 4 CP via the Web Downloader. Printer Driver Support Windows 95/98, and NT 4.0 for PostScript 3 and PCL5ec emulation Macintosh for PostScript 3 No driver support for DOS applications Color Calibration Color Calibration is accomplished by visual calibration.
  • Page 13: Reference Material

    DocuColor 4 LP/CP Feature Comparison EATURE PECIFICATION General Technology Description Copier Printer Controller AMPV Warm-up Time Copier Functions Resolution Zoom Input Size Copy Speed (letter/paper) - color/ B&W (ppm) Copy Speed (A3/paper) - color/ B&W (ppm) Transparency/Label/Cover Stock Speed - color/B&W (ppm) First Copy Out Time Color/ B&W (sec)
  • Page 14 EATURE PECIFICATION First Print Out Time Color/ B&W (sec.) PDF Direct Printing Electronics/ Software Controller CPU Memory (MB) std/ max option Hard Disk (GB) Printer Drivers (OS, PDLs supported)) Standard Ports Optional Ports Frame types supported Protocols Supported Auto IP Support Auto Protocol Switching Concurrent Job Receiving Paper Handling...
  • Page 15 EATURE PECIFICATION Universal Cassette Oversize Paper Cassette Token Ring 32 MB Memory Upgrade 64 MB Memory Upgrade Automatic Document Feeder Other Service Policy Smallest Footprint Weight (lbs/kg) Power Consumption Energy Star Com pliant Customer Installable Upgrade Availability Terms and product names used in this document may be trademarks or registered Trademarks of their respective companies and are hereby acknowledged.
  • Page 16 DC4 LP Base Configuration Configurations and Options DocuColor 4 LP Hi Capacity Feeder (LP Only) DocuColor 4 LP Printer Cabinet (LP Only) Terms and product names used in this document may be trademarks or registered Trademarks of their respective companies and are hereby acknowledged. Expectation Setting Document for DocuColor 4 CP DocuColor 4 LP/CP...
  • Page 17 Expectation Setting Document for DocuColor 4 CP Primary Customer DocuColor 4 Applications Special Considerations or performance limitations identified by Xerox and agreed to by the Customer: I have reviewed and understand these product specifications: Customer Xerox Sales Representative Xerox Customer Service Engineer / Representative...

This manual is also suitable for:

Docucolor 4 cp

Table of Contents