Xerox D95 User Manual page 287

049-700
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Check the connection between the Interface Cooling Module and the HCS.
049-900
Cause: The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-901
Cause: The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-902
Cause: The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-903
Cause: The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
High Capacity Stacker (HCS)
20-21