Xerox D95 User Manual page 201

Symptoms
Data remains in the
printer icon
If No, go to next
symptom.
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Yes/No Causes and Actions
Yes Cause An error occurred with the printer.
Action Check the error details.
If problem is not solved, go to next
Cause/Action.
Cause The IP address or SMB network path is
misconfigured.
Action Configure a correct IP address or SMB network
path.
For information about network settings, refer
to the System Administration Guide.
If problem is not solved, go to next
Cause/Action.
Cause The network connection between the computer
and machine is abnormal.
Action Check with your system administrator.
If problem is not solved, go to next
Cause/Action.
Cause The port is not enabled.
Action Enable the port in use.
For information about network settings, refer
to the System Administration Guide.
If problem is not solved, go to next
Cause/Action.
Cause Insufficient space available on the hard disk.
Action Delete unnecessary data to increase free space.
If problem is not solved, go to next
Cause/Action.
Cause The printer is connected to multiple computers.
Action Wait for a while, and then try printing again.
Problem solving
15-43