Xerox D95 User Manual page 296

Perfect Binder (D110/D125/D136 with integrated controller)
4 Compiler tray
This tray gathers the finished sheets into a book block, and the book block is used to
make the final finished book.
5 Cover inserter
Load paper here for covers or inserts.
6 Adhesive filling tray
Open this tray to insert adhesive pellets for the binding process.
7 and 8 Left and right front doors
Open these doors to clear paper jams or to access internal components.
9 Front doors LED
When a binding operation is in progress the LED changes to orange; this indicates that
the front doors are locked. When no binding is in process, the LED is not illuminated,
and the front doors may be opened to clear jams and to access the internal components.
Note
The LED also lights when the printer and Perfect Binder are powering on. Upon
completion of the power-on process, the LED switches off.
10 Trimmer waste tray
Excess paper trimmed from the book block sheets is stored in this tray. The tray is easily
removed to recycle the waste trimmings.
11 Book stacker tray
Finished (completed) bound books are transported to this area.
12 Book stacker tray release button and LED
Press this button to open the book stacker tray. A flashing green light indicates that
the tray is in the process of being opened or closed. A steady green light indicates that
the tray is open, and completed books may be removed.
13 Book stacker tray Full indicator
This LED flashes when a binding operation is in process. A steady green light indicates
that the Book stacker tray is full.
14 Entrance transport front door
Open this door to clear jams from the incoming paper path area (E4). Also, the adhesive
pellet scoop is stored in this area.
21-4 User Guide