Xerox D95 User Manual page 179

Fault code Cause and Remedy
016-758 Cause: No Permissions to use service.
Remedy: Check with your Auditron Administrator.
016-759 Cause: Maximum number of pages for this service has been reached.
Remedy: Check with your Auditron Administrator.
016-760 Cause: An error occurred during PostScript processing.
Remedy: Take one of the following actions:
Set Print Mode to Speed Priority.
Increase PostScript memory.
For information about Print Modes, refer to the print driver's online help.
For information about memory, refer to "Allocate Memory" in the System
Administration Guide.
016-761 Cause: An error occurred during image processing.
Remedy: Set the Print Mode to Speed Priority and start printing again. If this does
not remedy the error, print in the Ensure Print mode.
016-762 Cause: A print language not installed on the machine was specified.
Remedy: In Specify Print Mode under Port Settings, specify a print language.
016-764 Cause: Could not connect to the SMTP server.
Remedy: Contact the SMTP Server Administrator.
016-765 Cause: Could not send mail as the hard disk on the SMTP server was full.
Remedy: Contact the SMTP Server Administrator.
016-766 Cause: An error occurred on the SMTP server.
Remedy: Contact the SMTP Server Administrator.
016-767 Cause: Could not send mail as the mail address was wrong.
Remedy: Check the mail address and transmit again.
016-768 Cause: Could not connect to the SMTP server as the mail address of the machine
was incorrect.
Remedy: Check the mail address of the machine.
016-769 Cause: The SMTP server does not support confirmation of mail distribution (DSN).
Remedy: Send mail without setting confirmation of mail distribution (DSN).
016-772 Cause: Unable to retrieve scan data repository address from the CentreWare scan
service.
Remedy: Check the DNS address or define the scan data repository address by its
IP address.
016-774 Cause: Compression conversion is not possible due to insufficient hard disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
016-775 Cause: Image conversion is not possible due to insufficient hard disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
016-776 Cause: An error occurred during image conversion processing.
Remedy: A portion of the data might have finished image conversion processing.
Check the data via CentreWare Internet Services.
Refer to "CentreWare Internet Services" in the System Administration Guide.
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Problem solving
15-21