Xerox D95 User Manual page 198

Problem solving
Symptoms
Part of the image is
missing on the copy
If No, go to next
symptom.
Stripes appear in the
copy
If No, go to next
symptom.
Images on the copy are
skewed
If No, go to next
symptom.
Symptoms
Images on the copy are
skewed
If No, go to next
symptom.
15-40
Yes/No Causes and Actions
Yes Cause The paper is damp.
Action Replace with paper from a new ream.
Refer to .
If problem is not solved, go to next Cause/Action.
Cause Paper with folds or wrinkles has been set in the paper
tray.
Action Replace with paper from a new ream.
Refer to .
If problem is not solved, go to next Cause/Action.
Cause The document is pasted together or folded in.
Action The folded in or pasted part of the document may
not be touching the document glass. Place a stack of
white sheets on the document to hold the document
down flat against the document glass.
Yes Cause The document enlargement ratio is too large.
Action Stripes can appear at some enlargement ratios. Adjust
the copy enlargement ratio.
Refer to .
Yes Cause The document is not loaded correctly.
Action Load the document correctly.
Refer to .
If problem is not solved, go to next Cause/Action.
Cause The document guides are set incorrectly.
Action Load the document correctly and align the document
guides with the edges of the document.
Refer to .
If problem is not solved, go to next Cause/Action.
Yes/No Causes and Actions
Yes Cause The paper tray is not set properly.
Action Set the tray by firmly pushing it in as far as possible.
Refer to .
If problem is not solved, go to next Cause/Action.
Cause The paper guide for Tray 5 (Bypass) is misaligned.
Action Load the paper correctly, and align the paper guide
with the edge of the paper.
User Guide