Perfect Binder Hints And Tips; Copy Mode - Xerox D95 User Manual

Tip
Before using the Perfect Binder, always refer to the hints and tips section of this chapter.

Perfect Binder hints and tips

The following hints and tips will optimize your time and efficiency when using the Perfect
Binder.
Blank Cover (Copy mode): Select this option either for blank covers (front and back)
or when using preprinted covers.
If some of your originals are being used for the front/back covers, you may want to
copy these originals from the document glass.
When copying originals for the front/back covers, the Layout Adjustment > Original
Orientation > Sideways Images option may be useful. Depending on the other
options selected, the Sideways Images option may ensure that the images are copied
in the correct orientation for the copied output.
Remember to start the glue heating process as soon as possible. This ensures that
the Perfect Binder begins immediately after you press Start or send a network print
job to the copier/printer.
If you are unfamiliar or inexperienced with using the Perfect Binder, you may want
to adjust the default energy saver mode for the Perfect Binder.
- By default the Perfect Binder enters energy saver mode after 10 minutes of
inactivity.
- Adjusting the default time to a higher setting (such as 60 minutes), ensures that
the Perfect Binder will be ready to start after the various options for your job
have been selected. This is applicable for all three modes.
For paper size and trim recommendations always refer to the table located later in
this chapter.
When applicable, select other options (for example Layout Adjustment and/or 1-2
Sided options) before starting the perfect bound job.

Copy mode

For the copy mode, the Perfect Binder options are accessed from the copier/printer UI
by selecting Services Home > Copy > Output Format > Perfect Binding.
When the optional Perfect Binding feature is On, the following options are available:
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Perfect Binder (D110/D125/D136 with integrated controller)
21-15