Configuring Tape Drive Parameters - Quantum Scalar i40 User Manual

Configuring Tape Drive Parameters

Quantum Scalar i40 and Scalar i80 User's Guide
Operator Panel
1 Select Setup > Dedicated Slots > I/E.
2 Press Modify.
3 Use the Up and Down buttons to select a value.
4 Press Apply.
5 Press Exit.
6 Save the library configuration (see
on page 107).
Web Client
1 Select Setup > I/E Station Slots.
The I/E Station Configuration screen displays. The Current
Settings column lists the number of I/E station slots that are
currently configured.
2 Under the New Settings column, select the number of I/E station
slots to configure.
3 Click Apply.
4 Save the library configuration (see
on page 107).
You can configure Fibre Channel tape drive loop ID, topology, and speed
using the operator panel or the Web client. On the Web client, you can
also view the actual topology and speed, plus the tape drive's world-
wide node name (WWNN) and other information about the tape drives.
You cannot configure SAS tape drive settings. A SAS tape drive's SAS
address is automatically and uniquely generated based on a unique
World Wide Name (WWN) that the drive receives when it is configured.
You can view SAS tape drive settings (but not change them) on the Web
client.
Chapter 4: Configuring the Library
Configuring Tape Drive Parameters
Saving the Library Configuration
Saving the Library Configuration
65