Quantum Scalar i40 User Manual page 53

Quantum Scalar i40 and Scalar i80 User's Guide
Operator Panel
Element Description
Status The status field displays the current state or
operation being performed by the robot. If the
robot is not idle, the status will blink. status can
be any of the following:
• Initializing — The is currently in the process of
• Autoleveling — The robotics hardware is being
• Homing — The robot is performing a home
• Teaching — The robot is performing a teach
• Calibrating — The robot is performing a
• Scanning — The robot is performing an
• Unlocking — The robot is in the process of
• Move Media — The robot is moving media
• Loading — The robot is in the process of
• Unloading — The robot is in the process of
• Idle — The robot is ready and idle.
• Not Ready — The robotics system is not ready.
Chapter 3: Understanding the User Interface
initializing.
autoleveled.
operation.
operation.
calibration operation.
inventory operation.
unlocking a magazine.
from one location to another.
moving a tape to load into a tape drive.
unloading a tape drive and returning it to the
source location.
Operator Panel
25