Figure 32 Configuring Partition Encryption - Quantum Scalar i40 User Manual

Chapter 7: Encryption Key Management
Configuring Scalar Key Manager (SKM) on the Library
Figure 32 Configuring
Partition Encryption
180
2 If you want to change the encryption method for a partition, make
sure that no tape drives in that partition have cartridges loaded in
them. If tape drives have cartridges loaded, you cannot change the
encryption method.
3 Select an encryption method from the drop-down list for each
partition. See Table 6
encryption methods. (For tape drives that support encryption, the
default is Allow Application Managed.) The encryption method
applies to all encryption-capable tape drives and media in that
partition.
Note: When you change the encryption method on a partition,
the partition is taken offline. When the change completes,
the partition comes back online automatically.
on page 181 for a description of the
Quantum Scalar i40 and Scalar i80 User's Guide