Figure 27 I/E Station Locked Message - Quantum Scalar i40 User Manual

Figure 27 I/E Station Locked
Message
Quantum Scalar i40 and Scalar i80 User's Guide
4 Within 30 seconds, open the I/E station by pulling outward on the
magazine bezel handle until the magazine stops moving.
If you do not open the magazine within 30 seconds, it locks and you
receive the following failure message.
5 When finished, push the magazine in completely.
The I/E station is now locked.
Web Client
1 Select Operations > I/E Station Unlock.
2 Select an I/E station to unlock and click Apply.
Note: Only closed I/E stations are listed.
3 Click Apply to confirm, and click OK.
The Progress Window displays. The Progress Window contains
information on the action, elapsed time, and status of the
requested operation. Do one of the following:
• If Success appears in the Progress Window, the I/E station was
unlocked. Click Close to close the Progress Window. The
operator panel displays the status Unlocking and then Idle.
• If Failure appears in the Progress Window, the I/E station did
not unlock.
4 Within 30 seconds, pull outward on the magazine bezel handle to
open the I/E station.
If you do not open the magazine within 30 seconds, it locks.
Chapter 6: Performing Library Operations
Unlocking and Opening the I/E Station
147