Figure 75 Scalar I80 Packaging - Quantum Scalar i40 User Manual

Figure 75 Scalar i80 Packaging

Quantum Scalar i40 and Scalar i80 User's Guide
Chapter 9: Installing, Removing, and Replacing Components
Top foam
Library (anti-static
wrap not shown
for clarity)
Bottom foam
Shipping carton
Bottom tray
Pallet
Scalar i80 only: Place two corner boards on the long edges on top of
the shipping carton. Strap the box to the pallet, then wrap the entire
assembly in stretch-film prior to shipping.
Caution: When unpacking the library in its new location, lift it out of
the packaging and immediately place it on its side to
remove the four thumbscrews securing the Y-tray to the
floor of the library. Do not place it upright until you have
removed the four thumbscrews, or you could damage the
chassis or the Y-tray. When placing the library on its side,
do not set it on the "rack ear" or the magazine handle, or
you could damage them.
Packaging the Library for Moving or Shipping
297