Setting The Session Timeout - Quantum Scalar i40 User Manual

Setting the Session Timeout

Quantum Scalar i40 and Scalar i80 User's Guide
For example:
ktpass ‐out library.keytab ‐princ library/
delos.dvt.mycompany.com@OURREALM.LOCAL
+rndPass ‐ptype KRB5_NT_SRV_HST ‐crypto RC4‐
HMAC‐NT ‐mapUser ourrealm.local/computers/
kerbtest
• For Windows 2008:
ktpass ‐out library.keytab ‐princ library/
<fqdn of library>@<realm>
+rndPass ‐ptype KRB5_NT_SRV_HST ‐crypto AES256‐
SHA1
‐mapUser <realm>/computers/<computer account>
For example:
ktpass ‐out library.keytab ‐princ library/
delos.dvt.mycompany.com@OURREALM.LOCAL
+rndPass ‐ptype KRB5_NT_SRV_HST ‐crypto AES256‐
SHA1
‐mapUser ourrealm.local/computers/kerbtest
The library automatically logs out a user or administrator when the
library has detected no activity for a specified length of time. This
always occurs on the Web client, and will occur on the operator panel if
passwords are enabled (see
Operator Panel on page 84). The default session timeout is 15 minutes.
You can change that to 30, 45, or 60 minutes. You can only change this
setting on the operator panel.
Chapter 4: Configuring the Library
Setting the Session Timeout
Enabling and Creating Passwords on the
97