Figure 36 Changing Encryption Method To Allow Application Managed - Quantum Scalar i40 User Manual

Chapter 7: Encryption Key Management
Scalar Key Manager Functions Available on the Library
Figure 36 Changing
Encryption Method to Allow
Application Managed
194
3 Select an SKM partition configured for library managed encryption,
and temporarily disable library managed encryption by changing
the Encryption Method from Enable Library Managed to Allow
Application Managed (see
which partition it is
minutes.
4 Click Apply.
Caution: When you change the partition's encryption method to
Allow Application Managed, the data that was
written to the tapes while the partition was configured
for Enable Library Managed can no longer be read,
until you change the partition back to Enable Library
Managed. You will only be disabling for a short time,
and then changing back to Enable Library Managed
(just to trigger the key generation process) so this
should have little effect, unless you forget to turn it
back to Enable Library Managed.
5 Wait 3 minutes to allow the changes to complete.
6 Go back to the encryption partition configuration screen and
change the Encryption Method back to Enable Library Managed
(see Figure 37).
7 Click Apply.
Figure 36 on page 194).
, because you will be changing it back in a few
Quantum Scalar i40 and Scalar i80 User's Guide
Remember