Releasing Magazines
via the User Interface
Figure 28 Magazine Unlocked
Message
Figure 29 Magazine Locked
Timer Message
Quantum Scalar i40 and Scalar i80 User's Guide
Use this method when the library is turned ON.
Operator Panel
1 Select Actions > Magazine.
2 Select a magazine and press Release.
Note: Only closed magazines are listed.
3 Wait until the robot unlocks the magazine and the screen displays
the Magazine is now unlocked message (see
4 Pull outward on the magazine bezel handle to slide the magazine
out as far as you wish, or remove it completely. Once you slide the
magazine back into the slot all the way, it locks again automatically
If you do not open the magazine within 30 seconds, it locks and you
receive the following failure message.
Chapter 6: Performing Library Operations
Releasing Magazines
Figure
28).
149