Installing The Library In A Desktop Kit - Quantum Scalar i40 User Manual

Chapter 9: Installing, Removing, and Replacing Components

Installing the Library in a Desktop Kit

Installing the Library in a Desktop Kit
244
4 Remove all the tape drives from the library (for details, see
Removing and Replacing a Tape Drive
5 Remove all the magazines from the library (for details, see
and Replacing a Magazine
6 Unscrew the captive thumbscrews in the "rack ears" that secure the
library to the rack (see
7 Slide the library out of the rack. Keep the library level as you slide it
out of the rack.
8 Place the library on a flat, stable surface.
The instructions for installing the Scalar i40 and the Scalar i80 in a
desktop are the same. The only difference is that the Scalar i40 has two
side panels, and the Scalar i80 has four.
on page 286).
on page 271).
Figure 51 on page 243).
Quantum Scalar i40 and Scalar i80 User's Guide
Removing