Laser Framing; Figure 10-1 Laser Framing; Laser Framing Status - Microscan MS-9 User Manual

Laser Framing

Laser Framing
To adjust laser framing, click the
or down as shown here.
Usage: This is useful to avoid highly reflective objects, for filtering out unwanted
signals, and avoiding the wrong symbols.
Definition: Sets the percentage of time the laser is ON during each scan so that only
a selected portion of the scan width is effectively scanned.
When Laser Framing is disabled, the laser is ON during the full scan arc.
Serial Cmd: <K700,
Default:
Disabled
Options: 0 = Disabled
Note: Laser framing adjustments for OMR symbols are best made in the OMR menu.
Check this to enable
Laser Framing.

Figure 10-1 Laser Framing

Note: This view may be slightly different for each model.
10-4
MS-9 Scanner User's Manual
Laser Control
laser on/off,laser framing
1 = Enabled
button, and Laser On/Off
status,laser off time,laser on time>
Use your cursor to adjust the start
position for
Laser Framing.
Use your cursor to adjust the end
position for
arrows up
Laser Framing.