Step 8 Configure The Scanner - Microscan MS-9 User Manual

Step 8 — Configure the Scanner
By ESP
To make change scanner settings, or to access the utilities or terminal window, click on
the button.
App Mode
To return to the Setup Mode, click on the
See Chapter 2, "Using ESP"
By Serial Commands
From your terminal program or the terminal screen in ESP, you can enter serial string
commands configuration and utility commands as described herein.
See
"Serial Configuration Commands" on page A-13
Serial Commands" on page
Note: You can learn the current setting of any parameter by inserting a question mark
after the number, as in
By Embedded Menu
From your terminal program you can send a
menus.
See
"Embedded Menus" on page
for detailed explanation of ESP features.
12-3.
To see all "K" commands, send <K?>.
<KA?>
A-20.
button.
Setup Mode
and
command to access the embedded
<D>
MS-9 Scanner User's Manual
Chapter Quick Start
"Summary of Utility
1-9