Step 3 Install Esp - Microscan MS-9 User Manual

Install ESP
Step 3 — Install ESP
(ESP is short for Easy Setup Program.)
With your scanner connected to a host computer with Windows operating system, you
can use the ESP to configure and control the scanner.
1. Insert the Microscan Tools Drive into a USB port on your computer.
2. Launch
Setup.exe
If downloading from the web:
a) Go to
http://www.microscan.com/downloadcenter/
b) Enter company information.
c) Select
ESP
d) Extract
ESP WinZip
3. Note where your ESP.exe file is stored on your hard drive.
At the end of the install process, copy a shortcut of the ESP icon to the desktop.
4. Click the
ESP
1. You can also access the scanner through its embedded menus. See
page A-20.
1-4
MS-9 Scanner User's Manual
1
under ESP and follow the prompts.
and download to your computer hard drive.
files to a directory of your choice.
icon to start the program.
"Embedded Menus" on