Appendix C Ib-131 Interface Module; Table A-3 Host 25-Pin Connector; Table A-4 Trigger 4-Pin Connector; Table A-5 Power 3-Pin Connector - Microscan MS-9 User Manual

IB-131 Interface Module
Appendix C — IB-131 Interface Module
The IB-131 interface module simplifies connecting to the scanner by providing separate
ports for the host, power supply, trigger and network. The network port is used for mul-
tidrop or daisy chain configurations. See the following pages for configuration diagrams
and a list of cables offered by Microscan for ease of connectivity when using the IB-131.

Table A-3 Host 25-pin Connector

1 External ground
2 Transmit data (RS-232)
3 Receive data (RS-232)
4 RTS
5 CTS
6 Output 2 (+)
7 Signal ground
8 Output 1 (+)
9 Trigger (–)
10 Trigger (+)
11 Default configuration
13 Receive data RS-422 (+)
14 Transmit data RS-422 (–)
15 Output 3 (+)
16 Receive data RS-422 (–)
17 Output 1/2/3 (–)
19 Transmit data RS-422 (+)
25 New master/OMR (in)

Table A-4 Trigger 4-pin Connector

1 Power + 10 to 28 VDC (out)
2 Trigger (–) (in)
3 Power Ground
4 Trigger (+) (in)
a. For NPN type, connect pins 1 and 4,
send signal to pin 2
b. For PNP type, connect pins 2 and 3,
send signal to pin 4.

Table A-5 Power 3-pin Connector

1 Power Ground
3 Power + 10 to 28 VDC (in)
A-10
MS-9 Scanner User's Manual
a
b
a

Table A-6 Scanner 15-pin Connector

1 Power + 10 to 28 VDC (out)
2 Transmit RS-232/RS-422 (–)
3 Receive RS-232/RS-422 (–)
4 Power/Signal Ground
5 Trigger (–) (out)
6 RTS/Aux Transmit/RS-232/RS-422 (+)
7 Output 1 (+)
8 Default configuration
9 Trigger (+) (out)
10 CTS/Aux Receive RS-232/RS-422 (+)
11 Output 3 (+)
12 New master/OMR (out)
13 External ground
14 Output 2 (+)
15 Output 1/2/3 (–)

Table A-7 Network 25-pin Connector

1 Ground
2 Aux Receive RS-232
3 Aux Transmit RS-232
6 Output 2 (+)
7 Signal ground
8 Output 3 (+)
13 Receive data/RS-422 (+)
14 Transmit data/RS-422 (–)
15 Output 3 (+)
16 Receive data/RS-422 (–)
17 Output 1/2/3 (–)
19 Transmit data (RS-422+)