Table A-1 Ms-9 Status Lights - Microscan MS-9 User Manual

General Specifications
LED Indicators
LED
POWER
GOOD READ (100%)
(not in read rate test)
STATUS (80%)
(not in read rate test)
20%, 40%, 60%, 80%, 100%
a. In Continuous and Continuous1, the status light is always on.
b. If these LEDs are flashing in a pattern and the scanner is not in a read rate test, there is an
error pattern. Contact Microscan support.
Read Ranges Safety Certifications
FCC, CDRH, CE, UL/cUL, TüV, BSMI
Product specifications are given for typical performance at 25°C (77°F) using grade A symbols.
Some performance characteristics may vary at high temperatures or other environmental extremes.
© 2013 Microscan Systems, Inc.
A-4
MS-9 Scanner User's Manual

Table A-1 MS-9 Status Lights

State
Green-On Scanner has power
Off No power
On Scanner is ready to read
Off Scanner is not ready to read
On Scanner is in a read cycle
Off Scanner is not in a read cycle
On Represents the percentage of good reads
Specifications subject to change.
Status
a
b