Laser Framing - Microscan MS-3 Manual Book
Hide thumbs
Also See for MS-3:
- User manual (242 pages) ,
- Quick start manual (13 pages) ,
- User manual (106 pages)
Table of Contents
Advertisement
Laser Framing
Laser Framing
Usage:
Useful in avoiding highly reflective objects, for filtering out unwanted
signals, or avoiding the wrong symbols.
Definition:
Sets the percentage of the scan arc that the laser is ON for each scan.
Laser Framing Status
Definition:
When Laser Framing is disabled, the laser is ON for 100 percent of the
full scan. When enabled, the extent of the laser arc is determined by
the Laser On Position and Laser Off Position settings.
Serial Cmd:
<K700,
laser on/off
tion,laser off position,laser power>
Default:
Disabled
Options:
0 = Disabled
Note: Because scan widths are not always perfectly symmetrical, the most effective
way to setup laser framing is to experiment with the Laser On Position and Laser
Off Position commands until you get the best results.
MS-3 Laser Scanner User's Manual
7-6
status,laser framing
status,laser on posi-
1 = Enabled
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-3 and is the answer not in the manual?
Questions and answers