Table of Contents
Advertisement
Warning Messages
Warning Messages
Important Note: Warning Message Status must be enabled before any warnings in
this menu can be displayed
Usage:
These messages serve as a flag to service a scanner or as an early warn-
ing that potential problems could arise. They are particularly useful in
factories that run 24/7 and can't afford down time.
Definition:
Warning messages that relate to the environment and condition of the
scanner can be defined and set to activate specific outputs.
Note: When enabled, the error condition will override all other opera-
tional modes configured for the output.
When enabled, laser current and NOVRAM warning messages will be
transmitted to the host or any active port whenever the pre-defined con-
ditions are met.
Function:
When enabled, warning messages will be transmitted to the host or any
active port.
Note: This option must be enabled before any other warning messages
can be transmitted.
Warning Message Status
Serial Cmd:
<K400,warning message
novram corrupt warning status>
Default:
Disabled
Options:
0 = Disabled
9-6
MS-9 Scanner User's Manual
.
status,laser high status,laser low status,
1 = Enabled
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-9 and is the answer not in the manual?
Questions and answers