Table of Contents
Advertisement
Scanner Setup
The settings in this section are typically adjusted by qualified technicians. They time are
included here for special applications. Before making changes to individual commands
in this section, it would be advisable to make a written record of current settings.
Gain Level
(Factory Setting)
Usage:
Can be useful for fine-tuning gain or when portions of analog signals
spike as in the case of specular reflection or extraneous noise.
Caution: Changes to Gain are typically done i.
Definition:
Sets a voltage amplitude value for the analog circuitry.
Serial Cmd:
<K504,gain
Default:
30
default value may not be 30.
Options:
0 to 255
level,tracking>
(nominal). Gain is optimized at the factory before shipment; the
Chapter 4 Read Cycle
MS-9 Scanner User's Manual
4-17
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-9 and is the answer not in the manual?
Questions and answers