Table of Contents
Advertisement
Autodiscriminate
Autodiscriminate
Although Autodiscriminate is not a configuration command, but it is included here as
a convenient tool for enabling most symbol types.
Usage:
Commonly used for quick setup mode to detect symbol type. This is par-
ticularly useful for users who might be unfamiliar with their application's
symbology.
Note: It does not alter individual fields such as Start/Stop, Fixed
Length, etc. These need to be setup individually.
Definition:
Enables all available symbology types except PDF417, UCC/EAN 128. The
user may also individually disable/enable each symbology type.
Serial Cmd:
<P>
Default:
Code 39
Other
<Q> Enables Code 39 only
Options:
<R> Enables Codabar only
<S> Enables I 2/5 only
Note: If using an I 2/5 symbol, verify that the number of characters in the symbol being
scanned matches the symbol length enabled for the I 2/5 symbol type (default is 10 and 6).
5-22
MS-9 Scanner User's Manual
Enables all symbologies except noted above
(only)
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-9 and is the answer not in the manual?
Questions and answers