HP 4800G Series Configuration Manual page 390

Features
IS-IS
BGP
IPv6 Static Routing
RIPng
OSPFv3
IPv6 IS-IS
Intermediate System-to-Intermediate System (IS-IS) is a link state
protocol, which uses the shortest path first (SPF) algorithm. This
document describes:
Configuring IS-IS Basic Functions
Configuring IS-IS Routing Information Control
Tuning and Optimizing IS-IS Networks
Configuring IS-IS Authentication
Configuring System ID to Host Name Mappings
Configuring IS-IS GR
Enabling the Logging of Neighbor State Changes
Enabling IS-IS SNMP Trap
Border gateway protocol (BGP) is an inter-autonomous system (inter-AS)
dynamic route discovery protocol. This document describes:
Configuring BGP Basic Functions
Controlling Route Generation
Controlling Route Distribution and Reception
Configuring BGP Route Attributes
Tuning and Optimizing BGP Networks
Configuring a Large Scale BGP Network
Configuring BGP GR
Enabling Trap
Enabling Logging of Peer State Changes
Static routes are special routes that are manually configured by network
administrators. Similar to IPv4 static routes, IPv6 static routes work well in
simple IPv6 network environments. This document describes:
IPv6 static route configuration
RIP next generation (RIPng) is an extension of RIP-2 for IPv4. RIPng for
IPv6 is IPv6 RIPng. This document describes:
Configuring RIPng Basic Functions
Configuring RIPng Route Control
Tuning and Optimizing the RIPng Network
OSPFv3 is OSPF version 3 for short, supporting IPv6 and compliant with
RFC2740 (OSPF for IPv6). This document describes:
Enabling OSPFv3
Configuring OSPFv3 Area Parameters
Configuring OSPFv3 Network Types
Configuring OSPFv3 Routing Information Control
Tuning and Optimizing OSPFv3 Networks
The IS-IS routing protocol supports multiple network protocols, including
IPv6. IS-IS with IPv6 support is called IPv6 IS-IS dynamic routing
protocol. This document describes:
Configuring IPv6 IS-IS Basic Functions
Configuring IPv6 IS-IS Routing Information Control
Description