Displaying And Maintaining Ethernet Link Aggregation - HP 6125G Configuration Manual

Figure 8 Local-first link-aggregation load sharing
To enable local-first load sharing for link aggregation:
Step
1. Enter system view.
2. Enable local-first load-sharing
for link aggregation.
Displaying and maintaining Ethernet link
aggregation
Task
Display information about an
aggregate interface or multiple
aggregate interfaces.
Display the local system ID.
Display the global or
group-specific link-aggregation
load-sharing criteria.
Display detailed link aggregation
information for link aggregation
member ports.
Command
system-view
link-aggregation load-sharing
mode local-first
Command
display interface [ bridge-aggregation ] [ brief
[ down ] ] [ | { begin | exclude | include }
regular-expression ]
display interface bridge-aggregation
interface-number [ brief ] [ | { begin | exclude |
include } regular-expression ]
display lacp system-id [ | { begin | exclude |
include } regular-expression ]
display link-aggregation load-sharing mode
[ interface [ bridge-aggregation
interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
display link-aggregation member-port
[ interface-list ] [ | { begin | exclude | include }
regular-expression ]
42
Remarks
N/A
Optional.
Enabled by default.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view