Is9Cconfig::setcode128; Code 128/Ean 128 Default Settings - Intermec 700 Series User Manual

Parameter
Decoding
EAN 128 Identifier
CIP 128 French Pharmaceutical
Codes
FNC1 Separator Character (EAN
128 norms)
Bar Code Length
700 Series Color Mobile Computer User's Manual

IS9CConfig::SetCode128

This function updates the Code 128 settings with new values.
Syntax
HRESULT IS9CConfig::SetCode128( ITC_CODE128_DECODING
eDecode, ITC_EAN128_IDENTIFIER eEan128Ident,
ITC_CODE128_CIP128 eCip128State, BYTE byFNC1, DWORD dwLength
);
Parameters
eDecode [in] Identifies the decoding for Code 128 symbology.
eEan128Ident [in] Identifies the EAN 128 identifier.
eCip128State [in] Identifies the CIP 128.
byFNC1 [in] Identifies the FNC1 separator character, usually
dwLength [in] Identifies the bar code length.
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.

Code 128/EAN 128 Default Settings

Default
Not Active
Include ]C1
Not Active
GS function Char
ASCII 29 or 0x1D
Any Bar Code Length
Chapter
any ASCII value.
Valid Range
ITC_CODE128_DECODING
ITC_EAN128_IDENTIFIER
ITC_CODE128_CIP128
0x00`0xFE ITC_CODE128_FNC1_NO_CHANGE
0x00`0xFE ITC_BC_LENGTH_NO_CHANGE
6 — Scanner Support
181