Code 128/Gs1-128 Settings - Intermec CN51 User Manual

Chapter 3 — Use the Scanner
52

Code 128/GS1-128 Settings

This section lists all settings for decoding the Code 128/GS1-128
symbology.
Code 128/GS1-128 Settings and Descriptions
Setting
Code 128
GS1-128
ISBT 128
GS1-128 identifier
Unconventional
GS1-128
ISBT concatentation
transmission
Verify check digit
Reading tolerance
GTIN compliant
Description
Enables or disables decoding of Code 128. Default is
enabled.
Enables or disables decoding of GS1-128. Default is
enabled.
Enables or disables decoding of ISBT 128. Default is
disabled.
Enables or disables the GS1-128 Application
Identifier (AI). The AI is a prefix code identifying the
meaning and format of the data that follows it.
Default is enabled.
Enables or disables decoding of Unconventional
GS1-128, a GS1-128 variant with two FNC1
characters at the beginning. Default is enabled.
Enables or disables concatenated bar codes, allowing
two bar codes to be read as if they were a single bar
code. Options include:
•
Disable (default)
•
Concatenated code
•
Concatenated or single codes
Sets the check digit for a higher level of security. The
check character is positioned between the final data
character and the stop character. Options include:
•
Disable (default)
•
French CIP
Sets the quality of the bar code that the scanner
reads. Options include:
•
High (default): Makes it easier to scan low quality
bar codes.
•
Medium
•
Low: Bar codes must be high quality to be read.
Enables or disables GTIN compliance. Default is
disabled.
CN51 Mobile Computer User Manual