Setting The Network Printers - Fujitsu ScanSnap N1800 Operating Manual

4.13 Setting the Network Printers

Set a printer connected to the network.
The procedure for setting a network printer is as follows.
1. Check the printer driver.
For details, refer to
2. Set the printer properties.
For details, refer to
3. Register the network printer.
Up to 100 network printers can be registered.
A network printer can be registered in the following ways.
Network Tree
Select a network printer from the network tree.
For details, refer to
Network Path
Directly enter the network printer path name.
For details, refer to
"Checking the Printer Drivers" (page
"Setting the Printer Properties" (page
"Registering a Network Printer (Network Tree)" (page
"Registering a Network Printer (Network Path)" (page
Read the printer manual beforehand for information about setting a printer, adding a
network printer, and other cautions.
Make sure that there is enough space in the drive before printing.
Do not set a virtual printer.
If a printer connected to different print servers is to be registered as a network
printer multiple times, the software version of the driver should be the same on each
print server.
If the software version of the printer driver differs, printing errors may occur.
159
Central Admin
Console
160).
161).
164).
167).