Download  Print this page

Table 5: Preprogrammed Preshots (honeywell Maxpro Mode, Honeywell Vcl, Pelco P Code, And Pelco D Code Control Systems) - Honeywell HD6 Series User Manual

Ptz camera in a dome.
Hide thumbs

Advertisement

8.6
PRESHOTS, CONTINUED
(Honeywell Maxpro Mode, Honeywell VCL, Pelco P Code, and Pelco D Code Control Systems)
PreShot 80
PreShot 81
PreShot 82
PreShot 83
PreShot 84
PreShot 85
PreShot 86
PreShot 87
PreShot 88
PreShot 89
PreShot 90
PreShot 91
PreShot 92
PreShot 93
PreShot 94
PreShot 95
PreShot 96
PreShot 97
PreShot 98
PreShot 99
Rev. 1.02
Table 5:
Preprogrammed Preshots
Run PTZ Tour 1
Run PTZ Tour 2
Run PTZ Tour 3
Program PTZ Tour 1
Program PTZ Tour 2
Program PTZ Tour 3
Terminate PTZ Programming Mode
Start VectorScan 1
Start VectorScan 2
Start VectorScan 3
Setup the Scan and Camera
Toggles the error table display
Toggles auto exposure ON and OFF. (Factory default is ON.)
Toggles backlight compensation ON and OFF. The unit must be in auto
exposure mode for backlight compensation to function.
Toggles between standard operation and NightShot mode. (Camera
models 843216-1011, 843216-1013, 843216-0984, and 843216-0985 only.)
Toggles between freeze and unfreeze video
Invokes the Flashback Function
Reserved
Camera/Scan Reset
Reserved
98
900.0679
22-June-2006

Advertisement

   Also See for Honeywell HD6 Series

   Related Manuals for Honeywell HD6 Series

Comments to this Manuals

Symbols: 0
Latest comments: