Honeywell HD6 Series User Manual page 104

7.5.1 Programming Privacy Zones, 18x Color and True/Day Night, 23x Color, and 25x
True/Day Night Cameras, Continued
1. Press and hold lock and press F6 (menu). The LCD displays the menu selections
available. Setup will be flashing to indicate that Setup is the currently selected
option.
2. Move the joystick left or right, press F3 ( ) or F4 ( ), or camera (left) or preset
(right) keys until SECT is flashing, and then press the aux key.
3. Move the joystick left or right until PRG is flashing and press the aux key.
4. Press camera or preset until the character P is flashing on the LCD and press the
aux key.
Factory set
5. Enter the password. (The factory set password is blank. Press Enter (F5) to submit
password
a blank password.)
a. Press the camera and preset keys to scroll through all available characters.
b. Continue step a. until the entire password is sent to the HD6.
c. Press Enter (F5).
6. Enter a Privacy zone number (0-9) and press Enter (F5).
7. Enter a Privacy zone title (up to 24 characters).
a. Press the camera and preset keys to scroll through all available characters.
b. Continue step a. until the desired title is sent to the HD6.
c. Press Enter (F5). The following options are displayed on the monitor.
8. Press the camera or preset keys until the character for the desired option is flashing
on the controller LCD. If you want to program zone coordinates, you can also press
the Sequence key to send the save command to the HD6.
9 If you selected S (or Sequence) to program zone coordinates, perform the following
steps.
a. Use the joystick to move the scan so the lower left corner of the privacy zone is
Rev. 1.02
When the desired character is flashing on the LCD, press the aux key.
When the desired character is flashing on the LCD, press the aux key.
E to edit the title
S to program zone coordinates
D to delete zone coordinates
N to save privacy zone title only
positioned at the lower left corner of the monitor, then press Enter (F5).
90 900.0679
22-June-2006