Download  Print this page

Display Options; Camera Message; Sectors; Preshot Names - Honeywell HD6 Series User Manual

Ptz camera in a dome.
Hide thumbs

Advertisement

5.2

DISPLAY OPTIONS

The camera message, digital zoom setting, PreShot title, and Sector ID title displays can
be enabled or disabled for each unit. The position of the camera ID display and the
Sector ID display is set using the Display Options menu. The current digital zoom
setting is displayed on the same line as the camera ID on the right side of the monitor.
Select option 2 Display Options from the MAIN
MENU.
Several options toggle only between ON and
OFF. Selecting each option toggles the value.
Refer to the controller user's manual for
operation of the controller to perform these
functions.

5.2.1 Camera Message

From the DISPLAY OPTIONS menu, select 1 to
turn the camera ID display
ON or OFF. Selecting 1 toggles the value
between ON and OFF.

5.2.2 Sectors

From the DISPLAY OPTIONS menu, select 2 to turn Sector titles ON or OFF.

5.2.3 PreShot Names

From the DISPLAY OPTIONS menu, select 3 to turn PreShot titles ON or OFF.

5.2.4 Digital Zoom Message

From the DISPLAY OPTIONS menu, select 4 to turn the actual digital zoom magnification
display ON or OFF. The digital zoom setting is displayed on the right side of the monitor
on the same line as the camera ID display. If camera name location is changed, digital
zoom setting display is also changed.
Rev. 1.02
1 Language .......................English
2 Display Options
3 Control Options
4 Diagnostic Options
5 Camera Options
6 Function Programming
ESC to Exit
1 Camera Msg ....................... ON
2 Sectors................................ ON
3 PreShot Names .................. ON
4 Digital Zoom Msg ............... ON
5 Startup Screen Msg ........... ON
6 Change Camera Name Loc.
7 Change Sector Name Loc.
8 Crosshairs
ESC to Exit
27
---- UltraDome HD6 ----
519543-1980
DISPLAY OPTIONS
900.0679
22-June-2006

Advertisement

   Also See for Honeywell HD6 Series

   Related Manuals for Honeywell HD6 Series

Comments to this Manuals

Symbols: 0
Latest comments: