Startup Screen Message; Change Camera Name Location; Change Sector Name Location - Honeywell HD6 Series User Manual

5.2 DISPLAY OPTIONS, CONTINUED

5.2.5 Startup Screen Message

From the DISPLAY OPTIONS menu,
select 5 to turn the startup screen display ON or
OFF.
If the startup screen display is ON,
it displays the standard screen.
If the startup screen is OFF, an alternate screen is
displayed upon power up.

5.2.6 Change Camera Name Location

From the DISPLAY OPTIONS menu,
select 6 to change the position of the
ID display. Use ↑ and ↓ keys to position the
camera ID, then select Enter (F5 on HJZTP
controller) when done.
When using the HJZTP controller use F1 ( ) and
F2 ( ) to position the camera ID.

5.2.7 Change Sector Name Location

From the DISPLAY OPTIONS menu,
select 7 to change the position of the Sector ID title
display. Use ↑ and ↓ to position the Sector ID, then
select Enter (F5 on HJZTP controller ) when done.
When using the HJZTP controller, use F1 ( ) and
F2 ( ) to position the camera ID.
Rev. 1.02
Protocol
9600 baud even parity – 8 bits
Camera
X
Use ↑↓ keys to position the
Name. Hit 'Enter' when done
Use ↑↓ keys to position the
Name. Hit 'Enter' when done
28
----UltraDome ----
HD6
Standard
FCB-EX48B
Honeywell Video Solutions
519543-1980
Please wait...15
Please wait...8
Cam nnn
********Sector********
900.0679
22-June-2006