Download  Print this page

Honeywell HD62 Quick Installation Manual

Indoor ir minidome camera.
Hide thumbs
   

Advertisement

HD62(X)
Indoor IR Minidome Camera

Quick Installation Guide

800-15842V1 - A - 11/2013

Warnings and Cautions

WARNING
Installation and servicing should be performed only by
qualified and experienced technicians to conform to all local codes
and to maintain your warranty.
WARNING
This device is configured for 12 V DC operation only. Do
not connect to a higher voltage. Use only with NRTL-approved 12 V DC
power supplies. To prevent potential ground loop issues, a separate
PSU should be used for each camera. A multiple output PSU may be
used if it has isolated and protected (2A max.) outputs.
CAUTION
The light emitted from the near-infrared light emitting
diodes (LEDs) provide illumination over a wide area. This light is not
considered a risk to the unshielded human eye. However, as with any
light source, it is recommended that normal precautions be taken to
avoid unnecessary exposure. For example, avoid staring into the
beam or viewing the LEDs directly with optical instruments at close
range.
CAUTION
IR LEDs may be warm after prolonged use.

Important Safety Instructions

Read and keep these instructions.
Please ensure that your installation area can safely support the weight of the
camera.
Do not install the camera in extreme temperature conditions. Only use the camera
where temperatures are within the limits shown in the specifications section of the
guide. Be especially careful to provide ventilation when operating under high
temperatures.
Do not aim the camera at extreme light sources to prevent damage to the CCD.
This camera is rated for indoor operation. Do not expose this camera to rain or
moisture.
Do not touch the camera lens, dome, or bezel (front glass plate).
Do not drop the camera or subject it to physical shock.
Do not use a strong or abrasive detergent when cleaning the camera.
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

FCC Compliance Statement

Information to the user: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Note
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Canadian Compliance Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du
Canada.
Manufacturer's Declaration of Conformance
The manufacturer declares that the equipment supplied with this guide is
compliant with the essential requirements of the EMC Directive 2004/108/EC,
the General Product Safety Directive 2001/95/EC and the RoHS Directive
2011/65/EU, conforming to the requirements of standards EN 55022 for
emissions, EN 50130-4 for immunity, EN 60950-1 for electrical equipment
safety, and EN 50581 for assessment of electrical and electronic products with
respect to the restriction of hazardous substances.
Package Includes
Camera (1)
Manuals (3)
Warranty (1)
IR reflectivity card (1)
Mounting template (1)

Key Features

630 TV lines resolution
1/3-inch interline transfer CCD
2.8–12 mm (F1.4) IR-corrected varifocal manual iris lens
0 lux minimum illumination with IR LEDs on
Up to 65 ft (20 m) of IR illumination, depending on scene reflectance
Configurable day/night settings
Digital wide dynamic range (D-WDR)
Digital noise reduction (DNR)
Backlight compensation (BLC)
Motion detection (4 programmable zones)
Privacy masking (8 programmable zones)
3D-axis gimbal for flexible camera positioning
Local video out port for quick adjustments
On-screen display (OSD)
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND•
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
Mounting screws (4)
Plastic anchors (4)
Service monitor cable (1)
2-conductor pigtail (1)
800-15842V1 - A - 11/2013

Advertisement

   Related Manuals for Honeywell HD62

   Summary of Contents for Honeywell HD62

  • Page 1: Fcc Compliance Statement

    HD62(X) THIS SYMBOL INDICATES THAT CAUTION DANGEROUS VOLTAGE RISK OF ELECTRIC CONSTITUTING A RISK OF SHOCK ELECTRIC SHOCK IS PRESENT DO NOT OPEN WITHIN THE UNIT. Indoor IR Minidome Camera CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT SHOCK, DO NOT REMOVE THE COVER.
  • Page 2: Mounting The Camera

    Document 800-15842V1 – Rev A – 11/2013 © 2013 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects.

This manual also for:

Hd62x

Comments to this Manuals

Symbols: 0
Latest comments: