CAMERA OPTIONS, 23X COLOR CAMERA, CONTINUED
5.7.2 Exposure Control
Select 2 to setup the lens exposure control
1. Backlight mode – the backlight mode
can be set to Manual (MAN) or auto
(AUTO) mode. Select 1 to toggle
between manual and auto mode.
Note: If the HD6 protocol is set for
Honeywell Maxpro mode and the
backlight mode is set to Auto, PreShot
command 93 can be used to toggle
backlight on or off.
2. Manual Backlight - if the backlight mode is set to manual mode, the manual
backlight can be set to ON or OFF. Select 2 to toggle the manual backlight on or
off. If the backlight mode is set to Auto, this manual backlight does not apply (NA).
3. Backlight Level 0-80 – This setting selects the brightness level of the Backlight
feature when it is ON, either automatically or manually. The available settings
are from 0 (dark) to 80 (very bright).
Select 3 to change the current level displayed. Enter the new backlight level and
4. Auto Exposure Level 0-99 – the auto exposure level can be set from 00 (dark) to 99
Select 4 to change the current auto
exposure level. Enter the desired level
and press Enter.
1 Zoom and Focus
2 Exposure Control
3 Video Setup
4 White Balance
6 Vert Phase Edge
7 Vert Phase 1-180 ..............180
ESC to Exit
1 Backlight Mode...............MAN
2 Manual Backlight.............OFF
3 Backlight Level 0-80.........32
4 Auto Exposure Level.........50
ESC to Exit
Auto Exposure Level ........................... 50
Enter number from 0 to 99 and press