Still Preshot; Vertical Phase - Honeywell HD6 Series User Manual

5.5 CAMERA OPTIONS, 18X COLOR AND 18X TRUE/DAY NIGHT CAMERAS,
CONTINUED

5.5.5 Still PreShot

Select 5 to turn Still PreShot ON or OFF.
If:
Still PreShot is ON
(Video is frozen)
Still PreShot is OFF
(Video is unfrozen)

5.5.6 Vertical Phase

1. Select 6 to select the vertical phase edge
for line locking the camera. Selecting 6
toggles between POS (positive), NEG
(negative), or NONE. If you select POS
or NEG, you can set the vertical phase
from 1 to 180.
2. Select 7 to change the vertical phase.
Enter a number from 1 to 180 and press
Enter (F5 on HJZTP controller).
Rev. 1.02
Then:
Video is frozen between PreShots. The video remains at
the current PreShot until the scan arrives at the next
PreShot, and then switches the video. If an operator
manually controls the scan, the still PreShot function is
disabled until the scan is sent to another PreShot.
Video returns to normal operation.
46
CAMERA OPTIONS
1 Zoom and Focus
2 Exposure Control
3 NightShot Control
4 White Balance
5 Still PreShot....................................OFF
6 Vert Phase Edge ........................... POS
7 Vert Phase 1-180.............................180
ESC to Exit
CAMERA OPTIONS
1 Zoom and Focus
2 Exposure Control
3 NightShot Control
4 White Balance
5 Still PreShot................................... OFF
6 Vert Phase Edge ........................... POS
7 Vert Phase 1-180 ............................ 180
ESC to Exit
Vertical Phase ....................................180
Enter number from 1 to 180 and press
Enter.
900.0679
22-June-2006