Configuring Record Control; Figure 8-7 Record Control; Table 8-4 Record Control Configurations - Honeywell Performance Series User Manual

Remote Directory

Configuring Record Control

Go to Setup Storage Setup Record Control.

Figure 8-7 Record Control

Table 8-4 Record Control Configurations

Parameter
Pack Duration
Pre-event
Record
Disk Full
Record Mode
Record Stream
Encrypt
Set storage directory where recorded video and snapshots will be
stored.
Function
Set the file size between1 to 120 minutes. The default is 8 minutes.
Enter a pre-record value.
For example, if you enter 4, the system can record the four seconds of
video in the buffer. Recording begins five seconds before the event
trigger.
Select Stop or Overwrite.
Overwrite: If the current working HDD is full, then the system will
overwrite the previous file.
Stop: If the current working HDD is full or is overwriting, the system
will stop recording.
Select Auto, Manual, or Off.
Select Main Stream or Sub Stream.
Check to enable the Encrypt function. The recording in the SD card
will be encrypted.
Configuring Storage Settings
71