Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 675

Menu Command
Fabric Binding. Select to configure whether switches can
merge with a selected fabric, which provides security from
accidental fabric merges and potential fabric disruption
when fabrics become segmented because they cannot
merge.
Port Fencing. Select to configure port fencing to protect
your SAN from repeated operational or security problems
experienced by ports.
Port Auto Disable. Select to configure port auto disable
flag on individual FC_ports or all ports on a selected
device, as well as unblock currently blocked ports.
FICON. (Enterprise Edition Only) Select to configure
FICON.
Allow/Prohibit Matrix. (Enterprise Edition Only) Select to
allow FICON users to configure an Allow/Prohibit Matrix
table. You can select any matrix tables and compare
them either vertically or horizontally.
Port Groups. Select to configure a group of ports from one
or more switches within the same fabric.
FC Troubleshooting. Select to troubleshoot your SAN.
IP Troubleshooting. Select to troubleshoot your IP.
List Zone Members. Select to display all members in a
zone.
Monitor Menu.
Performance. Select to monitor SAN devices.
DCFM Professional Plus User Manual
53-1001774-01
Application menus
Command Options
Configure Fabric. Select to configure cascaded FICON
from the selected fabric.
Merge Fabrics. Select to merge the selected fabrics.
Trace Route. Select to view the route information between
two device ports.
Device Connectivity. Select to view the connectivity
information for two devices.
Fabric Device Sharing. Select to determine if the selected
fabrics are configured to share devices.
Ping. Select to perform a zoning check between the
selected device port WWNs.
Trace Route. Select to view the route information from a
source port on the local device to a destination port on
another device.
Performance. Select to view IP performance between two
devices.
View Utilization. Select to display connection utilization.
A
641