Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 674

A
Application menus
Menu Command
Firmware Management. Select to download firmware to
devices.
Routing. Select to manage a selected router.
Logical Switches. Select to configure logical switches for
your SAN.
Encryption. Select to configure encryption for your SAN.
Zoning. Select to configure zones.
Names. Select to provide familiar simple names to
products and ports in your SAN.
FCIP Tunnels. Select to connect to remote fabrics.
High Integrity Fabric. Select to activate the following on
M-EOS and Fabric OS devices:
•
On M-EOS switches, HIF activates fabric binding,
switch binding, insistent domain ID and RSCNs.
•
On Fabric OS switches, HIF activates SCC policy, sets
Insistent Domain ID and sets Fabric Wide
Consistency Policy for SCC in tolerant mode.
640
Command Options
Save. Select to save device configurations to the
repository.
Save Running to Startup. Select to save the CEE running
configuration to the startup configuration on selected
switches. Requires at least one discovered CEE switch.
Restore. Select to restore device configurations from the
repository.
CEE. Select to manage a CEE switch, port, or link
aggregation group (LAG).
FCoE. Select to manage an FCoE port.
Configuration Repository. Select to manage device
configurations from the repository.
Schedule Backup. Select to schedule configuration
backup.
Replicate. Select to replicate the switch Configuration or
Security.
Swap Blades. Select to swap blades.
Configuration. Select to view the R_Ports on a router.
Domain IDs. Select to configure the router domain IDs.
Fabric. Select to configure fabric zones.
LSAN. Select to configure LSAN zones.
Set Change Limits. Select to set zone limits for zone
activation.
DCFM Professional Plus User Manual
53-1001774-01