Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 663

Problem
An error message with the following text
displays:
Real Time statistics collection has failed.
Please see master log for details.
DCFM Professional Plus User Manual
53-1001774-01
Resolution
2 To collect data, the SNMP credentials in the Management application and switch
must match.
SNMP v1 or v3: The community strings entered in the Address Properties dialog box -
SNMP tab must match the one entered in the switch.
If you enter 'test' as the SNMP v1 community string in the Management application,
then the community string in the switch must be 'test' as well.
To view the switch SNMP value, use one of the following commands from the switch
CLI:
HCLSwitch:admin> snmpconfig --show snmpv1
HCLSwitch:admin> snmpconfig --show snmpv3
To set the switch SNMP value, use one of the following commands from the switch
CLI:
HCLSwitch:admin> snmpconfig --set snmpv1
HCLSwitch:admin> snmpconfig --set snmpv3
Example
HCLSwitch:admin> snmpconfig --set snmpv1
SNMP community and trap recipient configuration:
Community (rw): [test]
Trap Recipient's IP address : [172.26.1.183]
Trap recipient Severity level : (0..5) [4]
Trap recipient Port : (0..65535) [162]
Community (rw): [OrigEquipMfr]
Trap Recipient's IP address : [172.26.24.26]
Trap recipient Severity level : (0..5) [4]
Trap recipient Port : (0..65535) [162]
Community (rw): [custom]
Trap Recipient's IP address : [172.26.1.158]
Trap recipient Severity level : (0..5) [4]
Trap recipient Port : (0..65535) [162]
Community (ro): [custom]
Trap Recipient's IP address : [0.0.0.0]
Community (ro): [common]
Trap Recipient's IP address : [0.0.0.0]
Community (ro): [FibreChannel]
Trap Recipient's IP address : [172.26.1.145]
Trap recipient Severity level : (0..5) [4]
Trap recipient Port : (0..65535) [162]
21
629