Configuring LLDP for FCoE
To configure LLDP for FCoE, complete the following steps.
1. Select Configure > Switch > CEE.
2. Select the switch to edit in the CEE Ports and LAGs table and click Edit.
3. Click the LLDP-DCBX tab.
4. The CEE Edit Switch - LLDP-DCBX tab dialog box displays.
5. Select the <Global Configuration> LLDP profile in the LLDP Profiles table.
6. Click the left arrow button to edit.
7.
8. Click OK.
9. Click Start on the CEE Confirmation and Status dialog box to save the changes to the switch.
10. Click Close on the CEE Configuration dialog box.
DCFM Professional Plus User Manual
53-1001774-01
The CEE Configuration dialog box displays.
The CEE Edit Switch dialog box displays.
FIGURE 108
CEE Edit Switch dialog box - LLDP-DCBX tab
Select the FCoE Application and FCoE Logical Link check boxes in the Advertise table to
advertise them on the network.
The CEE Confirmation and Status dialog box displays.
15
357